This is the manual guide on how to reset the Canon iP1000 printer. Just follow the guide below

Hardware Reset

• Turn off the printer and disconnect the printer cable.


• Press and hold the POWER button then turn on the printer.


• The LED indicator must  be green.


• Press and release the RESUME button , the indicator (L.E.D.) should be orange.


• Press and release the RESUME button again, the indicator (L.E.D.) should be green.


• Release both buttons.

After doing hardware reset don't turn off the printer just proceed two hardware reset

Software Reset

• Reconnect the printer cable


• Open General Tools Software


• Select USB Port and then select "EEPROM CLEAR"


• Push the "MAIN" bottom and "PLATEN" bottom in to "CLEAR WASTE INK COUNTER" box


• The led printer will be blinking for few moment and it should be reset


• Finally, push the "RELEASE" bottom and then push the "QUIT" bottom to exit program

Click Here to Download the Resetter