Popular Posts
-
When the error or pop-up message appears on your screen “ink absorber is full”. Your printer needs to reset. Here’s how to fix it! Hardwa...
-
Error Code 6502 appears mostly after changing the cartridge. Option 1 Unplug the printer Remove the faulty Cartridge Plug in the...
-
Now I have not gotten any Samsung ML-1660, but I have method to reset page counter Samsung ML 1660 for you. So that, you must to do this wit...
-
The message Waste ink tank almost full or the error5b00 appears on Canon Pixma iP6220D and Canon Pixma iP6210D. Just reset the was waste in...
-
Samsung ML-1640, a compact and cheep price and suitable for home and small office, has a starter Toner Cartridge can print maximum about 700...
-
This is the manual guide of resetting the Canon iP4680 printer. The indication of problem is lights blinking on the POWER and RESUME bu...
-
The waste ink absorber on Canon Pixma mp110 The waste Ink absorber is a small, deep sponge, located where the cartridges rest when the p...
-
Reset Canon Ip1300 The Canon Printer Pixma iP1xxx Series is high quality photo printer at an affordable price. Print borderless photos ...
-
This guide is to reset into factory defaults of the following model Brother DCP-6690CW. Follow the steps below: Make sure the machine ...
-
The SAMSUNG SCX-4300 is small, yet powerful. Despite its diminutive 16.00″ x 14.25″ x 9.10″ dimensions, it cranks out 600 x 600 dpi docum...
Powered by Blogger.
Previous Post
Wednesday, March 27, 2013
Monitor Display Error Indication
Low ink warnings are displayed by the Status Monitor with a corresponding orande LED Error blinking or steady display .
LED Display
Blinking error and actions
- 2x = No paper
Solution: set paper, and press the Resume/Cancel button to feed the paper - 3x = Paper jam
Solution: Remove the jammed paper, and press the Resume/Cancel button - 4x = No ink
Solution: Replace the ink cartridge or press the Resume/Cancel button to continue printing without replacing the ink cartridge - 5x The ink cartridges are not properly installed, or a non-supported ink cartridge is installed (the ink cartridge EEPROM data is abnormal)
Solution: Install the ink cartridges properly or confirm that the supported ink cartridges are installed - 7x = Ink cartridge not installed
Solution: Install the ink cartridge(s), and close the cover - 8x = Waste ink absorber full or platen waste ink absorber full warning (approx. 95% of the maximum capacity)
Solution: Pressing the Resume/Cancel button will exit the error and enable print - 14x = Non-supported ink cartridge installed
Solution: Replace the non-supported ink cartridge with the supported one - 16x = Used ink cartridge installed, or no ink
Solution: Pressing the Resume/Cancel button will exit the error, and enable printing
Subscribe to:
Post Comments
(Atom)
0 comments:
Post a Comment